About
A simple wire Deatly Hallows symbol!!!
MY FIRST TUTORIAL!!!! W00T!!!!! BTW, I came up with this myself while experimenting with wire... So, I hope you like it!
P.S. Sorry for all the steps, I just tried so simplify it by making each small thing a step.
P.P.S. Sorry for all the Harry Potter posts, most of my good projects just ended up being HP-related. I'll post other stuff sooner or later!
Tags
-
Carol B. added Wire Deathly Hallows Charm to Jewellery
25 Feb 00:02
-
Moira A. added Wire Deathly Hallows Charm to jewellry
22 Feb 10:18
-
Moira A. favorited Wire Deathly Hallows Charm
22 Feb 10:17
-
abigail r. added Wire Deathly Hallows Charm to Jewellery
06 Feb 06:01
-
sqzl favorited Wire Deathly Hallows Charm
19 Jan 03:16
-
Yvonne C. favorited Wire Deathly Hallows Charm
25 Nov 01:33
-
meligg13 favorited Wire Deathly Hallows Charm
15 Nov 05:44
-
astrid... favorited Wire Deathly Hallows Charm
23 Jun 15:50
-
Jessica N. favorited Wire Deathly Hallows Charm
18 Mar 18:14
-
Hayley S favorited Wire Deathly Hallows Charm
09 Feb 18:16
-
Step 1Start with a piece of wire that you think is going to be too long for the project. (If you don't, you'll run out of wire and have to start over, which isn't fun.)
-
Step 2About a centimeter and a half (or more) away from the end of your wire, bend it a bit. Maybe, say... 40 degrees.
-
Step 3Decide how long you want the sides of you triangle to be. Then, that far from the previous bend, bend it again, this time making your long segment of wire perpendicular to the piece sticking up on top.
-
Step 4Now, this part is a bit trickier. Use your cylindrical object (like a pen or a marker), and wrap the wire around it, centering your circle in the center of your triangle, with the circle touching all sides of the triangle.
-
Step 5Use your pliers to bend the final side of the triangle in to place. (Silly me, I took the pic holding the pliers on the wrong side of the triangle...)
-
Step 6Bend your remaining tail of wire up, at about a 90 degree angle to the rest of the shape.
-
Step 7Then, bend it down the center of your previously created shape.
-
Step 8Now bend it up on the other side of the shape and use your pliers to flatten it against your shape as much as possible.
-
Step 9Use your round-nosed pliers to make a loop in your tail a short distance away from the tip of your triangle.
-
Step 10Bend the tail back down so that it runs parallel to the Elder wand (the line down the center).
-
Step 11Then, clip it at the tip of the triangle.
-
Step 12Now, the piece you’ve left sticking off the top this whole time finally comes into play! Just wrap it around the double wire below the loop, starting at the tip of the triangle and wrapping upwards.
-
Step 13Finish wrapping, press down the end with pliers, straighten your loop, and... lumos! You’ve got yourself a Deathly Hallows charm!
CO + K User