On children's day in Japan, large carp kites fly above the homes. This sweet and colourful mini version is a cute way to celebrate and brighten up your own home.
I always loved seeing the giant carp flying high above peoples' homes in Japan during Children's day, so this year I couldn't help but make a colourful mini version to celebrate! Besides, they're too cute to wave around on just one day. I say it's children's day (and flying carp day) every day of the year!
- Babsi's Bean Burgers commented on Koinobori Japanese Flying Carp Diy 20 Aug 18:04
- Babsi's Bean Burgers favorited Koinobori Japanese Flying Carp Diy 20 Aug 18:03
- Alex Z. added Koinobori Japanese Flying Carp Diy to Интересное 12 May 14:57
- Nicole m. favorited Koinobori Japanese Flying Carp Diy 14 Jul 13:46
- Rebecca M. favorited Koinobori Japanese Flying Carp Diy 19 Jun 19:38
- PunkyFunk added Koinobori Japanese Flying Carp Diy to DIY the Room 22 Jun 21:13
- C G. favorited Koinobori Japanese Flying Carp Diy 16 Feb 20:28
- Pimke added Koinobori Japanese Flying Carp Diy to Deko 30 Jan 10:15
- thatgirlrahma favorited Koinobori Japanese Flying Carp Diy 19 Nov 18:09
- Caitlin C. favorited Koinobori Japanese Flying Carp Diy 21 Sep 06:19
In 3-4 colours, cut out several circles of tissue paper, approx 1.5 inches in diameter, then cut them in half to make semi circles. Place a piece of double sided tape all the way around the bottom of your toilet paper roll. Start placing the straight edge of each semi circle on the double sided tape, overlapping slightly so no roll shows underneath Ensure the curved end of the semi circle hangs off the roll so it isn’t attached. This end will be the fish’s tail. Complete all the way around.
Leaving a 5cm gap, place another strip of double sided tape around the roll and repeat with the semi circles. The colour order doesn’t matter much, just do what you think looks good. You will have to overlap a fair bit and not all the ends will be taped down. Leave them. The next layer should cover them.
Repeat all the way to the top, making sure you finish with the tape and half circles around the very top of the roll. This is the head. At this point if there are any half circles that are still sticking up, use double sided tape to stick them down.
Cut out a circle with white paper (approx. 1 inch in diameter) then use a black marker to draw a large circle inside for the eye. Use double sided tape to stick onto the side of the head.
Trim any ends if necessary so they’re about the same length. Repeat steps 1-6 to make two more carp.
Cut three pieces of twine about 7 inches long. Double knot each one onto your dowel, making sure the ends are even.
Place a piece of double sided tape inside the roll on the head side, opposite the eye. Starting with the top knotted twine on the dowel, secure the loose ends onto the double sided tape inside the roll. If you plan to swing this koinobori around, use hot glue instead, or place another piece of tape on top the twine.
Repeat on the opposite side, just behind the eye.
Do it all over again for the next two carp.